歡迎來到北京多多賓城建筑機械有限公司
- 010-61441596
-
GW20型全自動鋼筋彎箍機主要技術參數
GW20 Full-automatic Steel Hoop Bending Machine Technical Parameter
目型號
GW20
GW20B
GW30A
GW30B
額定電壓
380V
額定頻率
50Hz
電機功率
1.5 Kw
2.2Kw
工作周期
20-25r/min
26r/min
彎曲鋼筋直徑
φ4-φ20mm
σb≤450Mpa
Ⅱ級螺紋鋼φ6-14㎜
可彎曲鋼筋范圍φ6～φ28（Ⅱ級螺紋鋼）圓鋼φ6～φ30
（σb≤450Mpa）
工作角度
90° 135° 180°
整機重量
110±10Kg
210±10Kg
GW20型全自動鋼筋彎箍機是一種工程用小型鋼筋彎曲設備，本機具有彎曲工序簡化，工作效率高，角度控制采用控制模塊外围体育，彎曲準確，可將σb≤450Mpa的鋼筋加工成所需的各種幾何形狀。
本機輕巧靈活，使用簡便，性能穩定、雙腳踏開關，自動彎曲安全性高外围体育?？刂平嵌鹊膫鞲衅鞑捎梅墙佑|式外围体育，無撞擊、無磨損。使用壽命長，彎曲效率是彎曲機的4-5倍。它是小直徑鋼筋彎曲的理想設備外围体育，更是大型彎曲機的重要補充設備外围体育。
GW20 Full-automatic Steel Hoop Bending Machine is a small bar bending device for a project. This machine bending process is simple and working efficiency is high. The angle controlled by control module, bending accurately. It can bend the σb≤450Mpa reinforced bar into various shapes required.
This machine is flexble, easy to use, and has stable performance, double foot pedal switch, bending automatically in safety. The sensor of the control angle is non-contact, no impact, no wear. L ONG USING LIFE. The bending efficiency is 4-5 times as other bending machines. It is not only the ideal equipment for small diameter steel bar bending, but also important supplementary for large bending machine.
